# artec_eplus48u - SANE Backend configuration file # This section is for use with the Artec E+ 48U scanner # This scanner is also sold as # Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394 # This sections contains verbose description of each option. # For other scanners, see below. # # The USB section: # each device needs at least the following line: # usb vendor-ID and product-ID # Every device configuration in this file must begin with an usb entry. usb 0x05d8 0x4003 # Path to the firmware file # This file comes with the Windows driver # The scanner won't work without it option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb # Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes option ePlusPro 0 # for adjusting the default gamma values option redGamma 1.0 option greenGamma 1.0 option blueGamma 1.0 option masterGamma 1.9 #Use this options to set the default offset and exposure time values. option redOffset 0x28 option greenOffset 0x2f option blueOffset 0x2f option redExposure 0xa7 option greenExposure 0x116 option blueExposure 0xdc # The vendor and model string # This string is displayed by the frontends. If you do not want to get your # scanner reported as "Artec E+ 48U", then change the option accordingly. option vendorString "Artec" option modelString "E+ 48U" # device-name # # If autodetection does not work, then you can specify the device here # The device entry must be the last one in this config file (or the last one before a # new usb entry). #If you are using libusb, a device looks like this: #device libusb:001:002 #If you are using the scanner module (kernel driver), a device looks like this: #device /dev/usbscanner # ---------------------------------------------------------------------------- # Since the Trust Easy Webscan 19200 uses a different product id, we add # another usb section here. usb 0x05d8 0x4006 option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb option vendorString "Trust" option modelString "Easy Webscan 19200" # ---------------------------------------------------------------------------- # Since the Memorex Mem48U uses a different product id, we add # another usb section here. usb 0x05d8 0x4005 option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb option vendorString "Memorex" option modelString "MEM 48U" # ---------------------------------------------------------------------------- # Since the Trust 240H Easy Webscan Gold uses a different product id, we add # another usb section here. usb 0x05d8 0x4007 option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb option ePlusPro 1 option vendorString "Trust" option modelString "240H Easy Webscan Gold" # ---------------------------------------------------------------------------- # Since the UMAX AstraSlim SE uses a different product id, we add # another usb section here. usb 0x05d8 0x4009 option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb option vendorString "UMAX" option modelString "AstraSlim SE" # ---------------------------------------------------------------------------- # This section is for the Artec E+ Pro # Note, that the name of the firmware file is called 1200.usb for # this device usb 0x05d8 0x4004 option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb option ePlusPro 1 option vendorString "Artec" option modelString "E+ Pro" # ---------------------------------------------------------------------------- # This section is for the UMAX AstraSlim 1200 SE # Note, that the name of the firmware file is called 1200.usb for # this device usb 0x05d8 0x4010 option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb option vendorString "UMAX" option modelString "AstraSlim 1200 SE" # ---------------------------------------------------------------------------- # Since the Yakumo Scan50 uses a different product id, we add # another usb section here. usb 0x05d8 0x4011 option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb option vendorString "Yakumo" option modelString "Scan50"