Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
— |
artec_scanner_e_48u_unter_xsane [2015/05/28 22:18] (aktuell) admin angelegt |
||
---|---|---|---|
Zeile 1: | Zeile 1: | ||
+ | ====== Artec Scanner e+ 48U unter XSane und Simple Scan ====== | ||
+ | ===== XSane ===== | ||
+ | Damit der Artec Scanner auch unter Linux (Ubuntu 9.10) mit XSane funktioniert, benötigt man den Windows-Treiber. Diesen gibt's hier im [[http://www.jbackes.de/downloads/scanner/Artec48.usb|Download]] oder auf der Treiber-CD des Herstellers. Dieser wird in das Verzeichnis ''/usr/share/sane/artec_eplus48u'', das man noch anlegen muss, kopiert. | ||
+ | mkdir /usr/share/sane/artec_eplus48u | ||
+ | cp Artec48.usb /usr/share/sane/artec_eplus48u/ | ||
+ | |||
+ | ===== Simple Scan ===== | ||
+ | O.g. Beschreibung funktioniert unter Simple Scan (Ubuntu 14.04) genauso. Falls XSane nicht installiert ist, muss ggfls. noch das Verzeichnis /usr/share/sane angelegt werden. | ||
+ | <code bash> | ||
+ | mkdir /usr/share/sane | ||
+ | mkdir /usr/share/sane/artec_eplus48u | ||
+ | cp Artec48.usb /usr/share/sane/artec_eplus48u/ | ||
+ | </code> | ||
+ | |||
+ | Außerdem sollte geprüft werden, ob unter /etc/sane.d eine Datei "artec_eplus48u.conf" mit folgendem Inhalt vorhanden ist. | ||
+ | <code conf artec_eplus48u.conf> | ||
+ | # artec_eplus48u - SANE Backend configuration file | ||
+ | |||
+ | # This section is for use with the Artec E+ 48U scanner | ||
+ | # This scanner is also sold as | ||
+ | # Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394 | ||
+ | # This sections contains verbose description of each option. | ||
+ | # For other scanners, see below. | ||
+ | # | ||
+ | # The USB section: | ||
+ | # each device needs at least the following line: | ||
+ | # usb vendor-ID and product-ID | ||
+ | # Every device configuration in this file must begin with an usb entry. | ||
+ | usb 0x05d8 0x4003 | ||
+ | |||
+ | # Path to the firmware file | ||
+ | # This file comes with the Windows driver | ||
+ | # The scanner won't work without it | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | |||
+ | # Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes | ||
+ | option ePlusPro 0 | ||
+ | |||
+ | # for adjusting the default gamma values | ||
+ | option redGamma 1.0 | ||
+ | option greenGamma 1.0 | ||
+ | option blueGamma 1.0 | ||
+ | option masterGamma 1.9 | ||
+ | |||
+ | #Use this options to set the default offset and exposure time values. | ||
+ | option redOffset 0x28 | ||
+ | option greenOffset 0x2f | ||
+ | option blueOffset 0x2f | ||
+ | option redExposure 0xa7 | ||
+ | option greenExposure 0x116 | ||
+ | option blueExposure 0xdc | ||
+ | |||
+ | # The vendor and model string | ||
+ | # This string is displayed by the frontends. If you do not want to get your | ||
+ | # scanner reported as "Artec E+ 48U", then change the option accordingly. | ||
+ | option vendorString "Artec" | ||
+ | option modelString "E+ 48U" | ||
+ | |||
+ | # device-name | ||
+ | # | ||
+ | # If autodetection does not work, then you can specify the device here | ||
+ | # The device entry must be the last one in this config file (or the last one before a | ||
+ | # new usb entry). | ||
+ | #If you are using libusb, a device looks like this: | ||
+ | #device libusb:001:002 | ||
+ | #If you are using the scanner module (kernel driver), a device looks like this: | ||
+ | #device /dev/usbscanner | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # Since the Trust Easy Webscan 19200 uses a different product id, we add | ||
+ | # another usb section here. | ||
+ | usb 0x05d8 0x4006 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | option vendorString "Trust" | ||
+ | option modelString "Easy Webscan 19200" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # Since the Memorex Mem48U uses a different product id, we add | ||
+ | # another usb section here. | ||
+ | usb 0x05d8 0x4005 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | option vendorString "Memorex" | ||
+ | option modelString "MEM 48U" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # Since the Trust 240H Easy Webscan Gold uses a different product id, we add | ||
+ | # another usb section here. | ||
+ | usb 0x05d8 0x4007 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | option ePlusPro 1 | ||
+ | option vendorString "Trust" | ||
+ | option modelString "240H Easy Webscan Gold" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # Since the UMAX AstraSlim SE uses a different product id, we add | ||
+ | # another usb section here. | ||
+ | usb 0x05d8 0x4009 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | option vendorString "UMAX" | ||
+ | option modelString "AstraSlim SE" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # This section is for the Artec E+ Pro | ||
+ | # Note, that the name of the firmware file is called 1200.usb for | ||
+ | # this device | ||
+ | usb 0x05d8 0x4004 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb | ||
+ | option ePlusPro 1 | ||
+ | option vendorString "Artec" | ||
+ | option modelString "E+ Pro" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # This section is for the UMAX AstraSlim 1200 SE | ||
+ | # Note, that the name of the firmware file is called 1200.usb for | ||
+ | # this device | ||
+ | usb 0x05d8 0x4010 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb | ||
+ | option vendorString "UMAX" | ||
+ | option modelString "AstraSlim 1200 SE" | ||
+ | |||
+ | # ---------------------------------------------------------------------------- | ||
+ | |||
+ | # Since the Yakumo Scan50 uses a different product id, we add | ||
+ | # another usb section here. | ||
+ | usb 0x05d8 0x4011 | ||
+ | option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb | ||
+ | option vendorString "Yakumo" | ||
+ | option modelString "Scan50" | ||
+ | |||
+ | </code> | ||
+ | |||
+ | |||
+ | --- //[[mail@jbackes.de|JB]] 2014/12/16 10:12// |